Introduction to Sterile Wiper Manufacturing at Berkshire  read more |
| Validated sterile according to ANSI/ISO/AAMI 11137: American National Standard
Meets European standards EN 1174 and EN 552
70% USP grade IPA (isopropyl alcohol) filtered to 0.2 µm
Sterilized by Cobalt 60 gamma irradiation to a Sterility Assurance Level of 10-6
Certificates of Sterility shipped with each case and available on web by lot number 24/7
MSDS: Berkshire's MSDS sheets conform to ANSI Z400.1-2004 Standard (United States, Canada, Mexico). |
Berkshire's sterile wipers are designed for use in aseptic processing zones
where microbial and
particle contamination leads to an expensive loss of
product. |
| |
| VALIDATED PRE-WETTED STERILE WIPERS |
| Sterile SatPax® Choice ® |
| Higher saturation level to support the solution contact time needed in the regulated industries
65% cellulose/35% polyester hydroentangled nonwoven blend
Economical, no binders or other chemical additives
Final cleaning of surfaces or products prior to manufacturing or packaging
Pre-wetted with 0.2 µm filtered 70% USP grade isopropyl alcohol(IPA)/30% DI water
Re-sealable solvent resistant packaging with wipers in a c-folded configuration for single withdrawal
|
| read more |
| |
| Sterile SatPax® MicroSeal® WFI |
Higher saturation level to support the solution contact time needed in the regulated industries
100% continuous filament polyester, ultrasonic sealed edges minimize particle and fiber
contamination
Recommended for use in an ISO Class 4 (Class 10) cleanroom and above
General purpose cleaning and surface preparation
Pre-wetted with 0.2 µm filtered 70% USP grade isopropyl alcohol(IPA)/30% WFI
Resealable flexible pouches prevent solvents from evaporating, triple bagged
|
| read more |
| |
| Sterile SatPax® HA |
| Higher saturation level to support the solution contact time needed in the regulated industries
100% filament polyester, ultrasonic heat sealed edges minimize particle and fiber contamination
Recommended for use in an ISO Class 3 (Class 1) cleanroom and above
Cleaning sterile core surfaces and filling rooms
Pre-wetted with 70% USP grade isopropyl alcohol filtered to 0.2 µm
Resealable flexible pouches prevent solvents from evaporating
|
| read more |
| |
| Sterile SatPax® 670 |
| Higher saturation level to support the solution contact time needed in the regulated industries
55% cellulose/45% polyester, nonwoven, gamma sterilized
Recommended for use in an ISO Class 5 (Class 100) cleanroom and above
Final wipe down after disinfection
Pre-wetted with 70% USP grade isopropyl alcohol filtered to 0.2 µm Resealable flexible pouches prevent solvents from evaporating
|
| read more |
| |
| Sterile SatPax® 1000 |
|
55% cellulose/45% polyester, nonwoven, gamma sterilized
Recommended for use in an ISO Class 5 (Class 100) cleanroom and above
Ideal for general cleaning of prep areas
Pre-wetted with 70% USP grade isopropyl alcohol
filtered to 0.2 µm
Resealable flexible pouches prevent solvents from evaporating
|
| read more |
| |
| Sterile SatPax® 1200 |
|
100% continuous filament, double knit, non-run polyester, gamma sterilized
Recommended for use in an ISO Class 4 (Class 10) cleanroom and above
Laundered and packaged in Berkshire's ISO Class 4 (Class 10) cleanroom
Pre-wetted with 70% USP grade isopropyl alcohol
filtered to 0.2 µm
Resealable flexible pouches prevent solvents from evaporating |
| read more |
