Introduction to Pre-wetted Wipers Manufactured by Berkshire Corporation

Semiconductor grade isopropyl alcohol (IPA) and deionized water (DI) filtered to 0.2µm MSDS: Berkshire's MSDS sheets conform to ANSI Z400.1-2004 Standard (United States, Canada, Mexico).

Eliminate the issues of safety in mixing, dispensing and storing solvents with Berkshire's pre-wetted wipers.

PRESATURATED WIPERS

SatPax® Choice® 100

Economical, 65% cellulose/35% polyester hydroentangled nonwoven blend Recommended for use in an ISO Class 5 (Class 100) and higher environments Smooth surface with excellent strength and durability Re-sealable solvent resistant packaging for single wiper withdrawal Final cleaning of surfaces or products prior to manufacturing or packaging

read more

SatPax® 550

Soft, 100% meltblown polypropylene Recommended for use in an ISO Class 5 (Class 100) cleanroom and above Exceptionally low levels of fiber, particles and ions. Peel and reseal pouches allow for single wiper use and prevent evaporation Lot number on each pouch for traceability & process accountability Residual removal after detergent or disinfectant use

read more

SatPax® HA-R

Higher saturation level to support the critical solution contact time needed in the regulated industries 100% filament polyester, ultrasonic heat sealed edges minimize fiber and particle contamination Recommended for use in an ISO Class 3 (Class 1) cleanroom and above Laundered and packaged in Berkshire's ISO Class 4(Class 10) cleanroom Peel and reseal pouches allow for single wiper use and prevent evaporation Lot number on each pouch for traceability & process accountability Residual removal after detergent or disinfectant use

read more

SatPax® 670-R

Higher saturation level to support the critical solution contact time needed in the regulated industries Economical 55% cellulose/45% polyester, nonwoven Recommended for use in an ISO Class 5 (Class 100) cleanroom and above Peel and reseal pouches allow for single wiper use and prevent evaporation Lot number on each pouch for traceability & process accountability Residual removal after detergent or disinfectant use

read more

SatPax® 1000

55% cellulose/45% polyester, nonwoven. Recommended for use in an ISO Class 5 (Class 100) cleanroom and above Lot number on each resealable pouch ensure traceability 3 different IPA/DIH20 saturation solutions-70/30, 9/91, 6/94(6/94 canister only). Resealable flexible pouches prevent solvents from evaporating. Canister contains roll of perforated wipers

read more

SatPax® 1200

100% continuous filament, double-knit polyester. Recommended for use in an ISO Class 4(Class 10) cleanroom and above Laundered and packaged in Berkshire's ISO Class 4(Class 10) cleanroom Lot number on each resealable pouch ensure traceability Resealable flexible pouches prevent solvents from evaporating

read more

SatPax® 1200-R

100% continuous filament polyester with knife cut edges Higher saturation level to support the critical solution contact time needed in the regulated industries Recommended for use in an ISO Class 4 (Class 10) cleanroom and above Laundered and packaged in Berkshire's ISO Class 4(Class 10) cleanroom Lot number on each resealable pouch ensure traceability Extremely pure and durable

read more

SatPax® 3000

100% knitted polyester, tubular construction, sealed edge Recommended for use in an ISO Class 3 (Class 1) cleanroom and above Laundered and packaged in Berkshire's ISO Class 4 (Class 10) cleanroom Lot number on each resealable pouch ensure traceability 2 different IPA/DIH20 saturation solution concentrations-70/30, 9/91 Resealable flexible pouches prevent solvents from evaporating

read more

SatPax® ValuSeal 1500

100% continuous filament, double-knit polyester, sealed edge Recommended for use in an ISO Class 3 (Class 1) cleanroom Laundered and packaged in Berkshire's ISO Class 4 (Class 10) cleanroom Lot number on each resealable pouch ensure traceability Resealable flexible pouches prevent solvents from evaporating

read more