| Click here for Aseptic Processing. |
| |
| Critical zones and aseptic processing area require their own unique needs. The Berkshire portfolio brings to the table the range of products; autoclavable, pre-wetted, sterile, to support your specific process need. A Regional Technical Representative can guide you to the right choice for the right situation. |
| |
| All wipers are autoclavable |
|
| |
| CapSure™-LP |
|
100% continuous filament knit polyester with sealed edges
Patent pending surface treatment captures and retains particulate contamination
Unique knit construction yields high abrasion resistance |
| |
| CapSure™-VP |
|
100% continuous filament knit polyester with sealed edges
Patent pending surface treatment captures and retains particulate contamination
Light weight, high absorbency design reduces landfill waste impact when compared to more traditional heavier weight designs. |
| |
| SatPax® 670-R |
|
Pre-wetted with semiconductor grade IPA and deionized water filtered to 0.2µm
Higher saturation level to support the solution contact time needed in the regulated industries
Residue removal after detergent or disinfectant use |
| |
| MicroSeal SuperSorb® |
|
2-ply bonded, 100% knitted polyester with ultrasonic heat seal
Berkshire's most absorbent wiper
High abrasion resistance, works well with IPA, acetone and other solvents |
| |
| MicroSeal®-VP |
|
100% continuous filament knit polyester with ultrasonic sealed edges
Smooth surface with excellent loft and hand characteristics
High abrasion resistance, works well with IPA, acetone and other solvents |
| |
| ValuSeal-HA® |
|
100% knitted polyester with ultrasonic heat seal
Critically low particles and fibers
Works well with IPA, acetone and other solvents |
| |
| Durx® 670 |
|
Hydroentangled 55% cellulose/45% polyester
Smooth, highly absorbent and durable
Works well with IPA and other solvents
General purpose wiping and polishing of surface areas |
| |
| Durx® 770 |
|
Hydroentangled 55% cellulose/45% polyester with proprietary non-ionic binder
Low fiber and particle generation in non-woven
Soft, highly sorbent and durable
Wiping down of items in cleanroom gowning areas for passthrough
|
| |
| MicroFirst® |
|
Apertured 45% cellulose/55% polyester nonwoven
Durable with high wet strength
High absorbency
|
| |
| MicroSeal® 1200 |
|
100% knitted polyester
Works well with IPA, acetone and other solvents
|
| |
| ProWipe® 880 |
|
Ultrasonically bonded multi-layer 100% polypropylene
Engineered specifically for use with acids
Highly sorbent and durable
Ideal for equipment cleaning
|
| |
| UltraSeal® 3000 - 9 x 9 |
|
Tubular sealed edge two ply 100% polyester
Critically low particles and fibers due to only 2 edges
|
| |
| UltraSeal® 3000 - 12 x 12 |
|
Tubular sealed edge two ply 100% polyester
Tear resistant for rough surface cleaning
|
| |
| ValuSeal® LP |
|
100% knitted polyester
Lowest Non Volatile Residues available |
| |
| |
| BCR® Mops and Accessories |
|
| Mops and Accessories |
| |
|
| Swabs - Precision Cleaning - Validation |
| |
|
| Glove Liners - Comfort - Protection
|
| |
|
| Gamma Irradiated BCR ® Face Mask |
| |
|
| BCR® Bond 850 |
