Berkshire Corporation
Your Partner in Contamination Control
 
    
  Email
 
   
 
Electronics and printed circuits products
Aerospace/Defense Contractor
Home  |  Your Environment  |  Electronics/Printed Circuits
electronics/printed circuits
   

Cleaning and surface preparation, application and copper plating, pattern printing and masking, electroplating and etching each play a critical role in creating an active circuit. The strength and cleanliness found in the Berkshire knitted polyester lines will support the environment and provide
the absorbency, durability and cleanliness critical to your success. A Regional Technical Representative can guide you to the right choice for the right situation.

 
    All wipers are autoclavable
 
MicroSeal SuperSorb ™
  • 2-ply bonded, 100% knitted polyester with ultrasonic heat seal
  • Berkshire's most absorbent wiper
  • High abrasion resistance, works well with IPA, acetone and other solvents
  •  
    MicroSeal®-VP
  • 100% continuous filament knit polyester with ultrasonic sealed edges
  • Smooth surface with excellent loft and hand characteristics
  • High abrasion resistance, works well with IPA, acetone and other solvents
  •  
    ValuSeal-HA™
  • 100% knitted polyester with ultrasonic heat seal
  • Critically low particles and fibers
  • Works well with IPA, acetone and other solvents
  •  
    Durx® 670
  • Hydroentangled 55% cellulose/45% polyester
  • Smooth, highly absorbent and durable
  • Works well with IPA and other solvents
  •  
    Durx® 770
  • Hydroentangled 55% cellulose/45% polyester with proprietary non-ionic binder
  • Low fiber and particle generation in non-woven
  • Soft, highly sorbent and durable
  •  
    MicroSeal® 1200
  • 100% knit polyester with sealed edge
  • Laundered and packed in an ISO Class 4 (Class 10) cleanroom
  • Critically low particles and fibers, lowest extractables and ions
  •  
    MicroSeal® 3000 - 9 x 9
  • Tubular sealed edge two ply 100% polyester
  • Highly absorbent, pliable sealed edge
  •  
    ProWipe® 880
  • Ultrasonically bonded multi-layer 100% polypropylene
  • Engineered specifically for use with acids
  • Highly sorbent and durable
  •  
    SatPax® 1000 Sterile
  • 55% cellulose/45% polyester, nonwoven, gamma sterilized
  • Recommended for use in an ISO Class 5 cleanroom
  • Ideal for general cleaning of prep areas
  • Presaturated with 70% USP Grade Isopropyl Alcohol
  • Resealable flexible pouches prevent solvents from evaporating
  •  
    SatPax® 1200
  • Double knit, continuous filament, polyester construction
  • Laundered and packaged in Berkshire's ISO 4(Class 10) cleanroom
  • Saturated with semiconductor grade isopropyl alcohol (IPA) and deionized water (DIH 2 0)
  • Eliminate squirt bottles and uncontrolled saturation levels
  •  
    Super Polx® 1200
  • 100% continuous filament polyester
  • Laundered and packaged in an ISO Class 4 (Class 10) cleanroom
  • Absorbs three times its weight, durable for abrasive wiping
  • Equipment wrap and wipe downs
  •  
    UltraSeal® 3000 9 x 9
  • Tubular sealed edge two ply 100% polyester
  • Laundered and packed in an ISO Class 4 (Class 10) cleanroom
  • Critically low particles and fibers due to only 2 edges
  •  
    UltraSeal® 3000 12 x 12
  • Tubular sealed edge two ply 100% polyester
  • Laundered and packed in an ISO Class 4 (Class 10) cleanroom
  • Critically low particles and fibers due to only 2 edges
  •  
    ValuSeal™ LP
  • 100% knit polyester with sealed edge
  • Laundered and packed in an ISO Class 4 (Class 10) cleanroom
  • Lowest Non Volatile Residues available
  •  
        BCR® Cleanroom Bond
    Cleanroom Paper - Notebooks
     
        BCR® Mops and Accessories
    Mops and Accessories
     
        BCR® Glove Liners
    Glove Liners - Comfort - Protection
     
        BCR® Face Masks
    3 layer with Polyurethane Earloops, 210mm
    3 layer with Polyurethane Headbands, 210mm